中文简体
English
ភាសា​ខ្មែរ
  /  注册
复制链接
Car diagnostic tool
进入店铺
联系客服
FNIRSI 2C53P Handheld Tablet Oscilloscope Multimeter DDS Signal Generator 3 in 1, 2CH Automotive Oscilloscope Multimeters with 50Mhz Bandwidth, 19999 Counts, 250MS/s Sampling, 4.3 inch Touch Screen
已售 1
包邮
$112.99
$312.99
数量
+-
库存 1000
用户评价
还没有评论

FNIRSI 2C53P 3 in 1 Handheld Tablet Oscilloscope Multimeter DDS Signal Generator

2C53P

FNIRSI 2C53P is a handheld oscilloscope that integrates oscilloscope, multimeter and signal generator. 2C53P digital oscilloscope adopts 4.3-inch IPS ultra-high-definition touch screen, and built-in 4000mAh lithium battery, which is convenient for electricians or DIY enthusiasts to use indoors and outdoors.

Oscilloscope

1.Channel:Dual channel

2.Analog bandwidth:50MHz; Real-time sample rate:250MSa/s

3.Storage depth:Up to 64kByte; Input mpedance:1MΩ

4.Time base range:10ns/div - 10s/div; Vertical sensitivity:10mv/div - 10v/div

5.Vertical resolution:8 bits

6.Maximum measured voltage:±400V; Probe:1x/10x

7.Torage space:13M; Bandwidth limit:Support 20MHz limit

2C53P

Digital Multimeter & Signal Generator

Multimeter

DC Voltage, AC voltage:1.9999V/19.999V/199.99V/1000.0V; 1.9999V/19.999V/199.99V/750.0V

DC current, AC current:19.999mA/199.99mA/1.9999A/9.999A; 19.999mA/199.99mA/1.9999A/9.999A

Resistance:19.999MΩ/1.9999MΩ/199.99KΩ/19.999KΩ/1.9999KΩ/199.99Ω

Capacitance:999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF/9.999mF/99.99mF

Temperature:(-55~1300℃)/(-67~2372℉)

Diode:Yes; Continuity test:Yes

Signal Generator

Frequency:0-10MHz(Sine wave: 10MHz, other waveforms 5MHz)

Amplitude:0.1V-3.0V

Square wave duty cycle: 0-100%

Signal type:sinusoidal wave, square wave, sawtooth wave, half wave, full wave, positive step wave, negative step wave, DC signal, exponential rise, exponential fall, multi-audio, and sync pulse

2C53P

4.3 Inch Touch screen (480*272 pixels)

Screen material:Surface tempered glassSurface tempered glass + touch screen made of glass GLASS + IPS color screen

Backlight brightness can be set

2C53P

Trigger mode:AUTO/Normal/Single

Trigger type:Rising edge, Falling edge

Trigger level range:8 cells (positive/negative)

Waveform display mode:XY/YT/Scroll

Coupling method:AC/DC

Measured data:Period, frequency, peak-to-peak value, maximum value, minimum value, Average value, effective value, amplitude, duty cycle, pulse width

Math alculations:1+2、1-2、1*2、1/2、-1、-2、|1|、|2|、FFT

Save waveform screenshot:Yes

Export waveform images from computer:Yes

2C53P

2C53P

FNIRSI 2C53P Oscilloscope Package List

1. 2C53P(2CH Touchable Automotive Oscilloscope)*1

2. Alligator clip probe *1

3. P6100 Probe *2

4. Multimeter probe *1

5. Data cable *1

6. Product Manual *1

7.Storage bag *1


本店推荐

平台客服
消息
购物车
0
投诉建议
返回顶部