Before ordering,please read carefully to

avoid any mistakes.

The BLACK smartlink does NOT support remote diagnostic !!!!1)This is 100% Original Launch smartlink with main obd2 cable+USB cable( without other accessories).2)It is 4 in 1 version of XPRO5 /D-Z / Xdiag / Prodiag,and it works perfectly with the 4 kinds software AT THE SAME TIME!!!Question : What does 4 in 1 version mean ?Answer : 4 in 1 version means it works with D-Z+X-diag+X-PRO5+Pro-diag software at the same time ! you do not need to flash or do anything about it.3) It works with 12v passenger cars + Electronic Vehicles + 24v trucks such as : heavy duty + light trucks + pickup trucks + bus +tractors + shipping boat + contrsuction machinery4) It supports CAN + CAN FD + Doip Protocols ,and also can be used as J2534 tool.5) It comes with 1 year software and without software option ,you can order according your demand, and both are 4 IN VERSION and ready to work with diagzone+xpro5+xdiag+prodiag software at the same time ,no need to flash or do anything else !!!6) With 1 year software option , you could choose XPRO5 / D-Z / Prodiag /Xdiag as your 1 year free software. After you receive it ,please contact us and we will activate 1 year free software for you.(If you still need other software , need to pay extra cost to open it.Example, you choose Prodiag software as your 1 year free software , we open 1 year prodiag software free for you , if you still need D-Z or Xdiag or XPRO5 software , need to pay extra 75 usd )1 Year DZ software for smartlink including : CAR + EV + HD + Motorcycle ( no immo software can activate in DZ serve, Haynes need extra 75 usd/year)1 Year Xpro5 software for smartlink including : CAR + EV + HD + Motorcycle + immo ( Haynes need extra 50 usd/ year)1 Year Xdiag software for smartlink including : CAR + EV + Motorcycle + immo  （no haynes,HD need extra 75 usd/year）1 Year Prodiag software for smartlink including : CAR + EV + Motorcycle + immo + Haynes Pro （HD need extra 75 usd/year）7)All devices are tested by Launch IO tester tool with demo software before shipping,and it 100% works perfectly .8) The software does not work good with Android 13/14 or Samsung brand android .Best is Android 8/9/10/11/12 , please attention !      Attention !!!!!!Once connect to 12v/24v vehicles, its power on page like this , but please do NOT connect to wifi internet , its remote diagnostic function does not work because this is chinese version snamrtlink and its ip address is limited( If you care about it , please do NOT order it ).  Smartlink device itself supports muli-languages as below :English /Deutsch/French/Italiano/Spanish/Portuguese/Russian/Chinese/Japanes  

Launch X431 SmartLink  Heavy-duty Truck Module for Commercial Vehicles/ Passenger/ New Energy Cars Work with X-431 PRO3/ V+/PRO3S

NOTICE: The remote assistance is not available now.

Launch X-431 SmartLink is a heavy-duty vehicle diagnostic module developed by Launch Company based on Linux system, dual processor Cortex-A7+Cortex-M7, 8G storage, 256M storage, 320*480 resolution. It supports Bluetooth, Wi-Fi, USB and other communication methods, and can be used with X-431 PRO3S and PRO5 series.

It also support full system fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action test. Covering for Cummins, for Bosch, for Weichai, for Shangchai, for Yuchai, for Xichai, for Chaochai, for Yangchai, for Quanchai and other engine diagnostic software, it supports trucks, buses, construction machinery, agricultural machinery, trailers, ships and other types of vehicle software.

Features:

Work as a VCI (Vehicle Communication Interface)

Work as a Local J2534 PassThru Device

Work as a Remote J2534 PassThru Device

Note: LAUNCH X-431 HD SmartLink Module cannot be used alone. It only works with LAUNCH Tablet of X431 V+, X431 PRO3, X-431 PRO3S Series.

Launch X431 SmartLink C Technical Parameters

3.97“ Single-Touch Screen, 320 x 480

Working Voltage: DC 9V ~ 36V

Communication method: Ethernet

Type B USB 2.0

Storage: 8GB

Memory: 256M

Power Consumption: < 6W

Working temperature: -10°C ~ 50°C

Storage temperature: -20°C ~ 60°C

Storage humidity: 10% ~ 90%

Dimension: 204 x 110 x 45 mm

Launch X431 SmartLink C Service Platform:

SmartLink Platform is used to pair the connection between SmartLink C and SmartLink B operated with the internet browser.

SmartLink C user can post the remote diagnosis request on this platform. SmartLink B user can see the requests from their clients and accept the request to do the remote diagnosis.